冷凝器中弓形折流板结构与两相流诱发的振动

根据两相流体诱发振动的机理与相关公式,对在两相流状态下运行的稀醋酸酐冷凝器进行了振动分析,结果表明,采用双弓形折流板可有效地防止换热器的振动。     

Ultrasonic nondestructive evaluation of fibre-reinforced composite materials — a review

A framework is presented for examining the effectiveness of limiting and modelling arguments used in the analysis of fluid flows. It consists of examining the consequences of the arguments on the flow problem as a whole and breaking down the limiting/modelling process into a sequence of steps and associated sequence of flow problems, termed here as ‘lidels’. The notion of validity of lidels is given. Several examples are given to explain the present approach. Invited general lecture at 3rd ACFM, Tokyo, September 1986     

NUMERICAL SIMULATION OF STRESS-INDUCED SECONDARY FLOWS WITH HYBRID FINITE ANALYTIC METHOD

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｔｕｒｂｕｌｅｎｔｓｔｒｕｃｔｕｒｅｓｉｎｎｏｎ ｃｉｒｃｕｌａｒｄｕｃｔｓａｎｄｏｐｅｎｃｈａｎｎｅｌｓａｒｅｃｈａｒａｃｔｅｒｉｚｅｄｂｙｌｏｎｇｉｔｕｄｉ ｎａｌｖｏｒｔｉｃｅｓ .Ｔｈｅｓｅｖｏｒｔｉｃｅｓａｒｅｔｈ     

β放射性气体浓度计的新分度方法

本文介绍β放射性气体浓度计的一种新的分度方法——泄漏元件排气法。其特点是一只元件可分度放射性气体浓度计的许多读出数(甚至是几个量程),操作方便。     

注射成型中塑料熔体充填流动的粘度模型研究

对比研究了Cross_Exp 和Cross_WLF两种粘度模型 ,并分别利用这两种模型通过实例模拟研究了熔体粘度的压力依赖性对注射压力模拟的影响     

瓦斯燃烧器回流区测试

燃烧器流场内回流区的大小和形状决定了燃烧火焰的稳定性 ,利用APV激光测速系统 ,在燃烧器冷态测试实验装置上对一瓦斯燃烧器冷态模型的流动进行了研究 ,发现了该燃烧器流场内的双回流区结构 ,并得到了中心回流区尺寸与稳焰器结构的关系 ,为该结构类型燃烧器的稳焰设计及稳焰能力的评价提供了实验依据     

CADRE: An Asynchronous Embedded DSP for Mobile Phone Applications

Asynchronous design techniques have a number of compelling features that make them suited for complex system on chip designs. However, it is necessary to develop practical and efficient design techniques to overcome the present shortage of commercial design tools. This paper describes the development of CADRE (Configurable Asynchronous DSP for Reduced Energy), a 750K transistor, high performance, low-power digital signal processor IP block intended for digital mobile phone chipsets. A short time period was available for the project, and so a methodology was developed that allowed high-level simulation of the design at the earliest possible stage within the conventional schematic entry environment and simulation tools used for later circuit-level performance and power consumption assessment. Initial modeling was based on C behavioral models of the various data and control components, with the many asynchronous control circuits required automatically generated from their specifications. This has enabled design options to be explored and unusual features of the design, such as the Register Bank which is designed to exploit data access patterns, are presented along with the power and performance results of the processor as a whole.     

The boundary contour method for two-dimensional Stokes flow and incompressible elastic materials

 A variant of the boundary element method, called the boundary contour method (BCM), offers a further reduction in dimensionality. Consequently, boundary contour analysis of two-dimensional (2-D) problems does not require any numerical integration at all. While the method has enjoyed many successful applications in linear elasticity, the above advantage has not been exploited for Stokes flow problems and incompressible media. In order to extend the BCM to these materials, this paper presents a development of the method based on the equations of Stokes flow and its 2-D kernel tensors. Potential functions are derived for quadratic boundary elements. Numerical solutions for some well-known examples are compared with the analytical ones to validate the development. Received 28 August 2001 / Accepted 15 January 2002     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。